CSI Wireless Seres, Reference Manual

Page: 75 / 134

Seres Reference Manual
55
$JAPP,OTHER<CR><LF>
or
$JAPP,app<CR><LF>
Where ‘app’ may be one of the following by name:
app Description
waas This will change to the SBAS application
Autodif This will change to the e-Dif application
(referred to as autodif in the firmware)
Note – Other derivatives of the $JAPP command are the
$JAPP,1<CR><LF> and $JAPP,2<CR><LF> commands that can
be used to set the Seres to use the first and second application.
It’s best to follow up the sending of these commands with a $JAPP
query to see which application is 1 or 2. These two commands
are best used when upgrading the firmware inside the Seres, as
the firmware upgrading utility uses the application number to
designate which application to overwrite.
5.3.7 $JBAUD
This command is used to configure the baud rates of the Seres.
This command has the following structure:
$JBAUD,r[,OTHER] <CR><LF>
Where ‘r’ may be one of the following baud rates:
Baud Rates
4800
9600
19200