CSI Wireless Seres, Reference Manual

Page: 89 / 134

Seres Reference Manual
69
5.5.1 $JWAASPRN
This command allows you to both poll the SLX receiver for the SBAS
PRN’s in memory, and change them, if desired.
To poll the receiver for the current SBAS PRN’s, send the following
message:
$JWAASPRN<CR><LF>
There are no data fields to specify in this message. The receiver will
respond with the following message:
$>JWAASPRN,prn1,prn2
Where ‘prn1’ indicates the first PRN number and ‘prn2’ indicates the
second PRN number. The PRN numbers for WAAS are 122 and 134.
EGNOS is currently using PRN 120.
To change from the current PRN numbers, the following message should
be used:
$JWAASPRN[,sv1[,sv2]] <CR><LF>
Where ‘sv1’ is the PRN number of the first SBAS satellite and ‘sv2’ is the
PRN number of the second SBAS satellite. Either ‘sv1’ or both ‘sv1’ and
‘sv2’ may be specified.
The Seres will reply with the following response:
$>