Crystal Vision
Installation
TANDEM-110 User Manual R1.8
68
07/07/2010
5 Installation
TANDEM-110 may be fitted into three of the Crystal Vision range of rackframes:
2U Indigo or FR2AV frame for up to 12 TANDEMs or other single height
Crystal Vision modules,
1U Indigo or FR1AV frame for up to 6 TANDEMs or other single height
Crystal Vision modules
1U Desk top box for up to 2 TANDEMs or other single height Crystal Vision
modules.
There are five types of rear connector available to cater for all frames and to provide system
flexibility by allowing a mix between access to all connections and maximum module
packing density. Both balanced and unbalanced audio connectors are catered for.
RM04 RM07 RM36
12 TANDEMs in 2U, 6 in 1U
Analogue / 110
digital audio
No 2nd SDI output
6 TANDEMs in 2U 3 in 1U
75
digital audio
No 2nd SDI output
6 TANDEMs in 2U 3 in 1U
Analogue / 110
digital audio
2nd SDI output
RM05 RM08
9 TANDEMs in 2U
Analogue / 110
digital audio
2nd SDI output
9 TANDEMs in 2U
75
digital audio
No 2nd audio or SDI output
The single-width rear connector achieves maximum card density with up to 12 TANDEM
cards in a 2U frame, albeit at the expense of losing the second buffered SDI outputs. This
solution also demands a high-density multiway connector for balanced digital audio I/O,
but all connections, including GPIs and analogue preview monitoring are available.
The loss of second SDI output can be avoided by using a taller rear module. A double-
height single card rear module allows access to all connections at six cards per 2U frame
and three cards per 1U frame. A special all-connection triple card rear module achieves
nine cards per 2U frame.
There are also double-height single-card and quad-height triple-card rear modules available
with BNCs for unbalanced
digital
audio. However, the double-height version does not have
the second SDI output and the triple does not have the second digital audio outputs. Triple
height modules only fit in the 2U frame
