Crystal Vision
Installing Statesman
TANDEM-110 User Manual R1.8
18
07/07/2010
2.5 Statesman operation
Once Statesman is configured it should automatically detect any statesman compatible
modules in the connected frame or frames and display them in the main application left
hand explorer-style window.
Open any frame by clicking on the ‘+’ sign or by double clicking on a frame. Installed
modules should be shown with module icons. Frame and module icons can be named as
desired by right-clicking or using the edit menu and choosing rename.
To aid user recognition of module and frame status quickly, the following colour and size
coding is used:
A module is shown present by full colour and absent by greyed colour
A module is shown open by large icon size and closed by small icon
A module is the source of an active alarm if red and not alarmed if green
Double-clicking on a module will enable the display of the main application menus.
Statesman main application window
The two large control panes shown in the upper and lower halves of the window may be
used to display both TANDEM-110 circuit paths or ‘sides’, two functions such as both
routing tables can be shown for the same ‘side’, or menus for two different modules.
Click on the horizontal button-bar between the two panes to close the lower plane or drag
the button to vary the size of the panes.
