Crystal Vision
Installing Statesman
TANDEM-110 User Manual R1.8
25
07/07/2010
Adjusting audio delay
Once routing and delay has been assigned the value of the delay can be set using the
sliders on the Audio Delay menu.
Audio delay for side 1 and side 2
The destinations for which the delay is active will be shown using the card edge codes
under each slider. Delay can be set from 0 to 681 milliseconds.
Adjusting audio gains
The audio gain for each of the four audio channel inputs to the routing table for each side
may be adjusted from zero (mute) to eight times unity gain.
Audio gain for side 1 and side 2
To adjust channel gain click on the appropriate slider and drag it up or down whilst
holding the left mouse button down. The gain applied will be shown in the read-out
display above the slider.
To calibrate a channel to exactly unity gain click on the CAL button beneath the
appropriate slider or right click the slider and choose ‘calibrate’.
To gang gain slider controls together to move them as one, right click on the slider chosen
as the master with the CTRL key held down and then, whilst continuing to hold the CTRL
key, right click on one or more further gain sliders to use as slaves.
To clear ganged gain controls and restore them to individual use, select ‘Clear Ganged
Controls’ in the Tools menu.
