Crystal Vision
The card edge display
TANDEM-110 User Manual R1.8
49
07/07/2010
4.1 Card edge status menus
Status Only Menus
The SEL hex switch provides access to a range of status displays when the MENU DIP
levers are all OFF (UP). The available status-only displays (SEL positions 1-5) are
summarised in the following table:
SEL
No.
Description
Examples and comments
ADJ funct
0
Auto
Display shows first three status menus (SEL
positions 1, 2 & 3) on a priority basis. Use this
setting when card edge controls are not in use.
N/A
1
SDI signal status
sdi = SDI present, -sdi = SDI not present
For example: C-sdiB sdi indicates that side 1
is being used as an embedder, that the SDI
input is absent, that side 2 is being used as a
de-embedder and that the SDI input is present
N/A
2
AES & Ref I/P
status
(Note: if AIP or
AOP fitted
display is the
same as SEL 5)
If DIP fitted
Cas12 = Side 1 AES 1&2 channels present
Cas-2 = Side 1 AES 2 channel present only
Das34 = Side 2 AES 3&4 channels present
Cas2- Das-4 = AES 2 present on side 1 and
AES 4 present on side 2
If DOP fitted
Aref1 = AES reference 1 present
Aref- = AES reference 1 absent
Bref2 = AES reference 2 present
Aref1 Bref- = AES reference present on side
1, but absent on side 2
N/A
3
Active
audio/silence
Shows active audio channels (> 50dB FS)
‘s’ = silence, number = active channel
12ss = Audio channels 1&2 active, 3&4 silent
(<50dB FS)
N/A
4
Audio
Future additional audio signals
N/A
5
Option cards
fitted
aip: AIP2 option card
aop : AOP2 option card
dip : DIP2 option card
RS2: DIP2RS
dop7: DOP2-75 option card
dop1: DOP2-110 option card
N/A
Note:
For the above menus, the display is split between sides 1 and 2. The five left-most
characters refer to side 1 and the five right-most characters refer to side 2.
