Crystal Vision
The card edge display
TANDEM-110 User Manual R1.8
51
07/07/2010
4.2 Selecting default operational settings
A facility is provided to load default operational settings, including routing data, which
will be valid for the current TANDEM-110 installation. This is useful if the existing
settings have become corrupted or are invalid. This could occur as a result of changing
sub-boards or upgrading firmware.
The menu is obtained with Menu lever 6 ON (DOWN), all other levers UP (OFF
)
and the
SEL switch in position B. The display will read ‘Defaults?’ Turn the shaft encoder to
select between ‘Basic Def?’ and ‘Delay Def?’
Both options select one-to-one routing (in1.1 > out 1.1, in1.2 > out 1.2 etc) according to
the fitted sub-boards.
The ‘Basic’ option routes directly without delay whereas the ‘Delay’ option routes via the
currently selected audio delay. Neither option selects any phase inversion. When the
desired option is displayed, toggle piano switch 1 down and then up again to implement
the routing.
SEL
Meaning
Comments
B
Defaults?
Use the Shaft Encoder to select direct or delay
routing.
Once the appropriate defaults have been loaded, set the desired Audio Group selections,
as explained in section 5.3, to A/B/C/D = -/1/2/3/4 to suit your installation
