Crystal Vision
Introduction
TANDEM-110 User Manual R1.8
8
07/07/2010
Supported configurations
The following table shows the supported configurations:
Support
Side 1
Side 2
YES
Input option (G) + Embed/Mux (C)
De-embed/Demux (B) + Output option (J)
NO
De-embed/Demux (A) + Output option (I)
Input option (H) + Embed/Mux (D)
YES
Input option (G) + Embed/Mux (C)
Input option (H) + Embed/Mux (D)
YES
De-embed/Demux (A) + Output option (I)
De-embed/Demux (B) + Output option (J)
NO
De-embed/Demux (A/E)* + Embed/Mux(C)
De-embed/Demux (B/F)* + Embed/Mux(D)
The card edge control interface uses a condensed code to refer to source and destination
functions when routing audio through the module.
Code
Function
Code
Function
A
de-embedder or DEMUX SDI 1
G
input option SDI 1
B
de-embedder or DEMUX SDI 2
H
input option SDI 2
C
embedder or MUX SDI 1
I
output option SDI 1
D
embedder or MUX SDI 2
J
output option SDI 2
E
No option card on Side 1
F
No option card on Side 2
Note:
Channel assignments may be altered when monitoring embedded audio.
*If no option cards are fitted Codes E and F appear in the status display at the card edge
to replace de-embedder codes A and B for Side 1 and Side 2 respectively. However the
audio router will still function and monitoring quality de-embedded audio is still output
via the headphone socket and the rear connector – refer to the Monitoring section for
further details.
For more advanced features and functions use the TANDEM-200 which allows
simultaneous embedding and de-embedding and enhanced audio and video routing
functions.
