Crystal Vision
Installing Statesman
TANDEM-110 User Manual R1.8
19
07/07/2010
Warning:
Always ensure that the active front panel (if fitted) is in STATESMAN mode. If the front
panel is active, control via Statesman will be subject to high latency and the
response to changes will be slow. For further details of Statesman configuration
please refer to the Statesman manual.
The following card-edge shorthand codes are used for sources and destinations:
Code
Function
Code
Function
A
de-embedder SDI 1
G
input option SDI 2
B
de-embedder SDI 2
H
input option SDI 2
C
embedder SDI 1
I
output option SDI 1
D
embedder SDI 2
J
output option SDI 2
Audio routing and processing options
The first task to perform when routing audio for the first time is to chose which audio
groups will be involved in de-embedding and embedding. The next task is to decide if any
available external audio sources will be used and if there will be any external audio
destinations. Available external sources and destinations are entirely dependent on the
option cards fitted.
TANDEM-110 as mixed embedder
TANDEM-110 can de-embed any audio channel from any one incoming audio group
from the SDI stream and output it in any digital or analogue channel of an output option
card on the same side. Alternatively, it can embed any audio channel from a digital or
analogue input card into any channel of any one audio group in the outgoing SDI stream
on the same side.
