Creo Dolev 800V+, User Manual

Page: 35 / 90

Control Panel 25
Main Screen Soft Functions
In
STANDBY
state the soft buttons function as follows:
Utilities
Set Loading
Use this option to automatically cut the section of the media that was
exposed to light, and dispose of it in the unloading cassette/inline
processor.
¾
Move the
Cassette field
to
LRG, MED
, or
SML
(the default), according
to the size of cassette currently used.
Update Cst Mode
Use this option to indicate whether you wish to use one or two large
cassettes.
Press the soft
button
To...
Abort
Stop the current process
Status
View system messages.
Params
View the parameters of the last/current
exposure that the Host sent to the
Imagesetter.
Util
Perform various functions related to the
exposure media, and to get information on
the media.
Note: If the machine does not work properly at 0 parameter, the engineer must
change it. To do this, go to: Tools > Operation > Setup > Factory Table >
Conveyor Delay Time.
Note: If you are using 2 large cassettes, toggle the field to LWR (lower) or UPR
(upper).