Creo Dolev 800V+, User Manual

Page: 10 / 90

viii Using This Manual
Who Should Use This Manual
This guide describes the options available with the Dolev® 800V
3
/800V
4
imagesetter. The Dolev 800V+/800V
2
/800V
3
imagesetter is a high-speed
large-format internal drum output device. The large exposure format is
convenient for tradeshops and printers. In addition, the Dolev 800V+/
800V
2
/800V
3
imagesetter supports the preparation of plate-ready
separation films using the Creo Imposition feature.
Chapter 1, Safety Precautions
warns against laser, mechanical and
electrical hazards.
Chapter 2, Introduction to Dolev 800V+/800V
2
/800V
3
, introduces the
imagesetter, and explains the start up and shut down procedures.
These are followed by the Control Panel description, and the imagesetter
specifications.
Chapter 3, Media Management ,
explains how to unload the supply
cassette, load film into it, and load it back into the imagesetter.
The following sections explain the media setup functions, how the media
is exposed, ejected into the output cassette and developed, and the last
section explains how to remove stuck media.
Chapter 4, Res-Intensity Calibration
, explains how to guarantee high
quality exposures using a unique laser intensity for each plotting
resolution.
Chapter 5, Data Configuration Setting
, explains how to configure the
imagesetter with the Brisque.
For further technical information refer to the Dolev 800V+/800V
2
/800V
3
Installation Guide , 399Z1R556B.
For further information on error messages refer to the Dolev 800V+/800V
2
/
800V
3
Troubleshooting Guide , 653-00095B.