Creo Dolev 800V+, User Manual

Page: 37 / 90

Control Panel 27
Mechanical Startup
This function will activate the mechanical start up procedure.
Use the function after opening one of the doors or if you want to set back
the machine to standby.
Active Task Operation
This function will show the parameters during the active task.
Slave Board Statuses
This function will show the status of the boards.
Messages
This function will show the messages from the machine.
Tools Operation
The tools operation are tools for service engineer.
Full Length 0 - 63 61 Enter the length of a full roll of film.
Note: If you loaded a full roll of film, this value is identical to
that of Current Length.
Vendor
- None Toggle this field to
None
(the default) in order to use the
table specified in the Res/Int Table field.
Toggle this field to the name of the vendor of the loaded
media to use the Res/Int table that is specified in the
Res/Int Table # field. Note: If the Res/Int Table specifies
0, the system automatically selects a Res/Int table to suit
the specified vendor.
Parameter Range Default Do the following...