Creo Dolev 800V+, User Manual

Page: 64 / 90

54 Chapter 3 – Media Management
Item Description
Exposable
Area Displays the maximum image size supported by the
imagesetter. The exposable area is defined according
to the cassette’s exposable area.
Exposable Area
=
cassette’s size - offset values of output device. Varies
between Dolev 4press and Dolev 800. You cannot edit
these boxes.
Pivot Position
Displays the existing punch configuration. They
indicate the position of the punch hole that is defined
as the pivot (normally the round hole). You cannot
edit these boxes.
(If the selected
Punch System
is
External
, this option
is unavailable.)
Punch System Enables you to select a punch system from a list of
available systems.
Alignment
Designates the point on the image to be the reference
point (for example, the top-left) when you position
the image relative to the punch.
If you select
None
, or
External
, you will not be able to
define an offset.
Offset from
punch
Defines exactly where the reference point (top-left,
bottom-right, and so on) is positioned relative to the
punch. Default is 0,0.
If the defined Alignment is None or External, the
Offset
boxes are disabled.
Note: Each punch system has one origin (pivot), or
reference point, from where the measurements of the
alignment are made. The plus and minus signs in the R-icon
indicate a positive or negative offset and the direction. A
positive offset moves the reference point down and to the
right. A negative offset moves the reference point up and
to the left.
Minimum Film
Feed
Defines the minimum length of film that is fed when
the punch is activated. (If the selected
Punch System
is
External
, this option is unavailable.)