Creo Dolev 800V+, User Manual

Page: 70 / 90

60 Chapter 4 – Res-Intensity Calibration
Chemistry
Creo supports only Creo CS HDF Developer 1+2 in conjunction with Creo
Recording film.
Film Handling
Hard dot film is more sensitive to heat than rapid access film.
It is important not to exceed the specified storage and transportation
temperature specification.
Critical conditions
Shipment
: up to 50
o
C (122
o
F) maximum 2 x 12 hours.
Storage
: up to 28
o
C (82.4
o
F) allowed for 3 continued weeks per year.
The glue of the roomlight packaging might not withstand those extreme
values. If such an extreme condition was faced, the roomlight packages
should be visually checked. If the edge tape is loose, the film might have
been exposed to light and consequently damaged.
Attribute Specification
Safelight EncapSulite T10/S10/ND.4 green
or EncapSulite T20/ND.75
Storage
Average 18
o
C-21
o
C (64.4
o
F-
69.8
o
F)
Maximum 25
o
C (77
o
F)
Minimum 4
o
C (39.2
o
F)
No humidity control required
Film transportation
Temp up to 32
o
C (89.6
o
F)
Up to 14 days by truck, up to 3 days
by air
Film handling
Daylight loading conditions (DL)
Film disposal and Recycling
Possibility to recover silver by
specialist