Creo Dolev 800V+, User Manual

Page: 26 / 90

16 Chapter 2 – Introduction to Dolev 800V+/800V
2
/800V
3
[4] - Control Panel
Film loading and most basic operations are performed via the Control
Panel. In addition, the
Reset
switch
[a]
is recessed behind the bezel at the
top of the Control Panel. The
On/Off
switch
[b]
is also located next to the
Reset switch. The imagesetter is turned
on/off
using this switch.
Figure 6: Reset and On/Off Switches
[5] - Right service door
This door allows access to the Drum area. You may open this door to clear
media stuck in the drum area. Service engineers access the electronics and
optomechanics via the service doors.
[6] - Output cassette door
The output cassette is located behind this door. Exposure media can be
output either to the output cassette or to an in-line processor.
[7] - Adjustment legs
Four (4) adjustment legs are used to level the imagesetter. Before moving
the unit, unlock the legs.
Wheels
Four (4) wheels allow easy positioning of the imagesetter. Once the
machine is in place, the adjustment legs are locked into position and the
wheels are ineffective.
[b]
[a]