Crane Merchandising Systems BevMAX 4 Series, Technical Manual

Page: 16 / 105

15 of 97
see this value, the “Display Price” feature on the
EXE coin mech must be turned on.
Note:
If no price is programmed in the EXE coin
mech for the requested price line, or if the “Display
Price” feature is not turned on in the Coin Mech
this menu will show “not available”. Enter this
menu by pressing key 4. Press key 2 or key 3 to
select the desired price line. Press key 4, the
display will show “requesting,,,”. After the EXE
Coin Mech has responded with the value of the
price line, it will be shown. If the EXE CM does
not respond with the value, then “not available” will
be shown. Press key 2 or 3 to select another price
line or press 1 to exit menu.
“Quick Payback”- This function will
only display when EXE in the “Coke
Factory Setup” is turned on.
This menu allows the user to set the VMC to pay
back change immediately after a vend is
requested. With this option set, the price of the
vend is always deducted from the available credit
after a selection is made, even if the vender fails to
deliver the selected item. To enter this menu press
key 4. The current setting will display as “Quick
Payback; On or “Quick Payback Off”. Press key 2
to select the desired mode ON or OFF. Press key
4 to confirm. Press key 1 to exit menu.
“StS Programming” – SPACE TO SALES
ROUTINE
This function allows you to change the space to sale
settings. Press key number 4 and “Option #” or
“Custom StS” will show on the display, which indicates
the current space to sales option. For the 7 options
available, see list below. Press key number 2 to scroll
through the options. Press key number 4 with the
desired option showing on the display to save that
option and return to “StS Programming”.
Space to Sales Options:
“Option 1” 1 to 1 = Columns are assigned to
selections with the same number.
“Option 2” Tray = Full tray assigned.
Example: selections A1 thru A9
vend from columns A1 thru A9
sequentially.
“Option 3” Half Tray = Half tray assigned.
Example: selections A1 thru A5
vend from columns A1 thru A5
sequentially and selections A6
thru A9 vend from columns A6
thru A9 sequentially.
“Option 4” Groups of 3 = Groups of 3
columns are assigned sequentially
to work with associated selections.
Example: selections A1 thru A3
vend from columns A1 thru A3
sequentially.
“Option 5” Combined groups of 2 & 3 =
Selection grouping per tray will be
assigned columns 1 & 2; 3 & 4; 5 &
6; 7, 8, & 9 working with associated
selections.
“Option 6” Combined groups of 3 = Selection
grouping per tray will be assigned
columns 1, 2, & 3; 4 & 5; 6 & 7; 8 &
9 working with associated
selections.
“Custom StS” Custom space to sales = Allows
you to assign columns in blocks
working with associated
selections.
With “Custom StS” showing, press key number 4
and “Clear Settings?” will show on display. Press
key number 4 and wait a few seconds will clear the
current space to sale settings. Press key number 1
will return to “Custom StS”. Press key number 4
and wait a few seconds will show “Selection A1”
alternating with columns assigned to blocks. Press
key number 4 will show “First?A1” or the individual
selection to start a block. Press key number 3 to
scroll to “First?E9” or the largest selection available.
Press key number 4 will show “Last?A1” or the last
column for custom space to sales blocks. Press key
number 2 will show “Last?A1” or the largest column for
custom space to sales blocks available. Press key
number 4 will show “Save Setting?” Press key number
4 will save the new settings.
* “Config Switches” - MACHINE
CONFIGURATION
This function allows the user to access and change the
programming of the following machine configuration
settings. Note: This routine is lockable when using a
data collection device. If you press key number 4 and
the display shows “Locked Menu”, this means
configuration setting changes will not be allowed. If
“Config 1” is displayed, then configuration setting
changes will be allowed. “Locked Menu” can only be
enabled or disabled through DEX interrogation. If
“Config 1” is displayed, the listed settings are available.
Note: You must press key number 4 with the
configuration code displayed if you wish to enter the
edit mode. The “0” or “1” will be flashing to
acknowledge you are in the edit mode.
IMPORTANT: All machine configuration codes are
disabled coming from the factory (Config # 0).
Config 1
- Configuration Switch 1 - Multi-Price
Setting Mode
This code is used to enable the single price
mode “Config 1 0” or multi-price mode “Config
1 1”. Press key number 4 and “Config 1 #” will
be displayed, with the “#” flashing. Press key
numbers 2 or 3 to scroll between “Config 1 0”