Cradlepoint COR IBR350, Manual

Page: 48 / 148

Figure 65: Firewall Options
source of the attack or attempt to gain access to network services that are restricted to certain addresses.
LogWebAccess : Enable this option to create a syslog record of web (IP port 80) access. Each entry will contain the IP address of the server and
the client. Note that this may create a lot of log entries, especially on a busy network. Sending the system log to a syslog server is recommended.
To view the logs, go to
Status>SystemLogs
. For configuration options, including syslog server setup, go to
SystemSettings>Administration
and select the
SystemLogging
tab.
ZoneFirewall
A zone is a group of network interfaces. By default, all interfaces within a zone are allowed to initialize network communication with each other, but
any network traffic initialized outside of a zone to the interfaces within the zone is denied. Forwardings are used to allow traffic to traverse zones.
Filter Policies are used to define how traffic passing through a zone forwarding is filtered. Zones can be added, edited, or removed (except for the
All and Router zone).
Zones
Create, edit, and remove zones (i.e., groups of network interfaces). Once you have defined zones, add rules to the
FilterPolicies
and
Forwardings
sections to define what traffic is allowed between zones.
Figure 66: Network Zones
48