Cradlepoint COR IBR350 Page 144 Manual Download | Manualshive

Page: 144 / 148

background image

SNMP Conﬁguration

SNMP, or Simple Network Management Protocol, is an Internet standard protocol for remote management. You might use this instead of Enterprise
Cloud Manager if you want to remotely manage a set of routers that include both Cradlepoint and non-Cradlepoint products.

Figure 173: SNMP Conﬁguration

•

EnableSNMP

: Selecting “Enable SNMP” will reveal the router’s SNMP conﬁguration options.

•

EnableSNMP onLAN

: Enabling SNMP on LAN will make SNMP services available on the LAN networks provided by this router. SNMP will

not be available on guest or virtual networks that do not have administrative access.

•

LAN port#

: Use the LAN port # ﬁeld to conﬁgure the LAN port number you wish to access SNMP services on. (Default: 161)

• Enable SNMP on WAN: Enabling SNMP on WAN will make SNMP services available to the WAN interfaces of the router.
•

WAN port#

: Use the WAN port # ﬁeld to conﬁgure which publicly accessible port you wish to make SNMP services available on. (Default:

161)

•

SNMPv1

: SNMP version 1 is the most basic version of SNMP. SNMPv1 will conﬁgure the router to transmit with settings compatible with

SNMP version 1 protocols.

•

SNMPv2c

: SNMP version 2c has the same features as v1 with some additional commands. SNMPv2c will conﬁgure the router to use

settings and data formatting compatible with SNMP version 2c.

•

SNMPv3

: SNMP version 3 includes all prior features with security available. SNMPv3 is the most secure setting for SNMP. If you wish to

conﬁgure traps then you must use SNMP version 3.

•

Getcommunitystring

: The “Get community string” is used to read SNMP information from the router. This string is like a password that is

transmitted in regular text with no protection.

•

Setcommunitystring

: The “Set community string” is used when writing SNMP settings to the router. This string is like a password. It is a

good idea to make it diﬀerent than the “Get community string.”

SNMPv3

If you select SNMPv3, you have several additional conﬁguration options for added security.

•

Authenticationtype

: Select the authentication and encryption type that will be used when connecting to the router from the following

dropdown list. These settings must match the conﬁguration used on any SNMP clients.

–

MD5 with no encryption

–

SHA with no encryption

144

«
...
142
143
144
145
146
...
»

Summary of Contents for COR IBR350





















































































































































Reviews:

No comments

Related manuals for COR IBR350

Brand: ABB Pages: 20

Brand: ABB Pages: 66

FXO - RECORD NEW GREETING

Brand: WELLTECH Pages: 2

ePAQ-942 Series

Brand: QEI Pages: 42

Brand: Echelon Pages: 3

Brand: ZyXEL Communications Pages: 5

Brand: D-Link Pages: 83

Brand: AVM Pages: 12

Brand: Kaon Pages: 12

LAN ECO Comfort

Brand: SiKom Pages: 2

Brand: Perenio Pages: 32

WirelessHART Fieldgate SWG70

Brand: Endress+Hauser Pages: 138

Brand: Packet Media Pages: 7

Brand: Wildix Pages: 4

Brand: Teltonika Pages: 6

Brand: AirLive Pages: 163

Brand: Rockwell Automation Pages: 73

Touchstone TG6452

Brand: CommScope Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands