Convaid Trekker User Manual Download Page 3

Page: 3 / 48

Table of Contents

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Contents in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

How to remove chair from box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Preparing the chair for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Unfolding the chair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Folding the chair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Folding/unfolding the seating module . . . . . . . . . . . . . . . . . . . . . . . .7

Installing seating module onto mobility base . . . . . . . . . . . . . . . . . . .8

Removing Seating Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Installing Seat Module in Remove Configuration . . . . . . . . . . . . . . . .9

Reversible seating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Removing seating module from mobility bas . . . . . . . . . . . . . . . . . .11

Back height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Back height adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Seat depth adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Seat width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

H-harness with padded covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Pelvic positioning belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Depth adjustable crotch strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Foot support height adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Foot positioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Recline adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Tilt-in-space adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Push handle adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Wheel lock operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Two-point positioning belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Three-point positioning belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Four-point positioning belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Medical Neccessity under storage basket . . . . . . . . . . . . . . . . . . . .21

Attach Ventilator/Suction/Hardtray . . . . . . . . . . . . . . . . . . . . . . . . . .21

Head support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

I.V. Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Universal Bracket Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Adjustable Headwing Headrest Instruction . . . . . . . . . . . . . . . . . . .25

Hip Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Oxygen Tank Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Pomnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Legrest Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

LTV Vent Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Utility Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Shoe Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Caster Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Anti-Tip Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Removing User From Chair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Extended Strap Vest (Butterfly Harness) . . . . . . . . . . . . . . . . . . . . .30

Upper Extremity Support Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Calf Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Attach Canopy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Transit models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Transportation mode instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Removal & installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Maintenance, operating & safety instructions . . . . . . . . . . . . . . . . .35

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover

Setting Up

Fitting Guide

Wheels

Transit Models

Important Information

Operations

Accessories

Summary of Contents for Trekker

















































Search results

Summary of Contents for Trekker

Reviews:

Related manuals for Trekker

Brands by name

Popular brands

Convaid Trekker, User Manual

Search results

Summary of Contents for Trekker

Reviews:

Related manuals for Trekker

Brands by name

Popular brands