Convaid Trekker User Manual Download Page 26 | Manualshive

Page: 26 / 48

background image

22

CONVAID USER’S GUIDE

Fig. 65 2-Pt Positioning belt

Three-Point Positioning Belt

Fig. 66

Optional Feature:

To Buckle:

Slip the metal clasp on the belt strap into the crotch strap

buckle.

Fig. 66

To Release:

Press the gray button on the buckle and pull out the clasp.

Two-Point Positioning Belt

Optional Feature:

To Buckle:

Snap together the two straps at the buckle.

Fig. 65

To Release:

Press on each side to release buckle and pull away

from each other.

!

WARNING:

H-Harness & Positioning Belts

Use positioning belts ONLY to help support the occupant’s posture. Improper use of these belts

may cause severe injury to the occupant.

1. Make sure the occupant does not slide down in the wheelchair seat.

2. The belts must be snug, but not too tight. You should be able to slide your open hand, flat

between the belt and the occupant.

3. NEVER use positioning belts as a user restraint, or on an occupant who is

comatose or agitated.

Failure to heed these warnings may cause serious injury.

Four-Point Positioning Belt

«
...
24
25
26
27
28
...
»

Summary of Contents for Trekker

















































Reviews:

No comments

Related manuals for Trekker

Brand: ABB Pages: 2

Brand: ABB Pages: 63

Brand: OEG Pages: 168

Brand: Harmonic Drive Pages: 25

Brand: Nelson Pages: 8

Brand: Fairchild Pages: 2

Brand: Fairford Pages: 233

Brand: L-Acoustics Pages: 20

Brand: Z-Wave Pages: 3

Brand: rotork Pages: 22

Brand: OCL Pages: 2

Brand: CYBEX gold Pages: 34

Brand: Davey Pages: 8

Ideal Sportive 2 in 1

Brand: Safety 1st Pages: 33

Brand: Fairchild Pages: 4

HYGRASREG KH-10

Brand: S+S Regeltechnik Pages: 16

Brand: YASKAWA Pages: 27

Brand: iGrid T&D Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands