Convaid Trekker, User Manual

Page: 21 / 48

17
FITTING GUIDE
To adjust the height:
1. Pull out safety detent pin as shown in
Fig. 48
and remove. Repeat on the other
side while holding foot support with one hand.
2. Adjust foot support height as needed to accommodate user’s lower leg measurement
Fig. 49
3. Replace safety detent pins on both sides making sure the detent pins go all the way through.
Foot Support Height Adjustment
Fig. 48
Fig. 49
WARNING:
Some foot
support settings can cause the
foot support to interfere with
the front casters.
!
Trekker foot support is height adjustable.
To determine the correct seat-to-foot support
height, measure from the back of the knee to
the bottom of the heel.
Fig. 47
Fig. 47
For additional range:
1. Using a 5/32” allen wrench and a 7/16”
wrench remove the two screws connecting
bracket from footplate.
Fig. 50
2. Rotate connecting bracket 180° and reattach
through the open slot with a 5/32” allen
wrench and a 7/16” wrench.
Fig. 51
3. Repeat steps 1-2 on opposite side.
Seat to foot
Support
Height Height
Support
foot Seat to foot
Fig. 50
Fig. 51