Convaid Trekker, User Manual

Page: 14 / 48

CONVAI D U SER’S G U I DE
10
Tip Trekker 14 with Transit Brackets
When installing seating module in reverse configuration on a
Trekker size 14 with transit brackets.
Install seating module at a 45° degree level, to avoid anchor
brackets from interfering with frame bottom bar.
Installing Seating Module in Reverse Configuration
1. Before reversing seating base, pull tilt-stopper up.
This will ensure proper docking of the seating system.
2. Reverse base and align seat docking hooks on the back tube of the docking platform.
3. Pull on the safety lock release lever and engage to seat base lock bar.
Anterior Tilt
Limit Stop
Lever
Docking Hooks
Fig. 25 Fig. 26 Fig. 27
Removing Seating Module
1. Adjust back to upright position.
Seat module MUST be parallel to the floor.
2. Push Safety Lock release lever.
3. Lift seating module release bar
5. Pull seating module forward to disengage the
Docking Hooks from docking platform.
6. Lift seating module and remove from base.
Safety Lock
Release Bar Docking Hooks
Fig. 22 Fig. 23 Fig. 24
Fig. 20
Fig. 21