Convaid Trekker, User Manual

Page: 18 / 48

14
CONVAID USER’S GUIDE
1. Remove user from the chair
2. Remove seat cushion upholstery
3. Loosen the two (2) adjustment knobs on the underside
of the seat pan.
Fig. 40
4. Loosen any accessories that may prevent the seat pan
from sliding.
5. Push or pull on the front of the seat, evenly on both
sides, until the seat reaches the desired depth.
Fig. 41
6. Tighten the adjustment knobs
Fig. 40
and any
accessories loosened in step 4.
Seat Depth Adjustment
WARNING:
Do not place user on the chair while seat adjustments knobs are
loosened. Make sure they fully tightened before placing user on the chair.
!
Seat depth adjustment Fig. 40
Fig. 41
Fig. 39
Measure from the most posterior portion of the buttocks to the back
of the knee. Subtract from that measurement 1-2” to allow adequate
clearance between the seat and the back of the knee.
Fig. 39
Seat
Depth Depth
Seat