24
CONVAID USER’S GUIDE
Head Support
I.V. Pole
Attaching Head Support
1.
Remove head support cover by unzipping the cover on the back side.
Fig. 71 & 72
2.
Using a 5/32” Allen wrench and 7/16” wrench, secure the two provided
mounting Allen screws on the top center of the upper back plate.
Fig. 73
3.
Adequately tighten hardware.
Adjusting the Head Support
1.
Remove head support cover by unzipping the cover.
Fig. 71 & 72
2.
Using a 5/32” Allen wrench and 7/16” wrench, loosen the two provided
mounting Allen screws.
Fig. 73
3.
To adjust the height, once the mounting hardware has been loosened,
move the head support up or down as needed.
Fig. 74
4.
Secure the mounting hardware adequately and replace cover.
Fig. 71
Optional Feature:
The folding I.V. pole offered on the Trekker accomodates the user when
intravenous fluids, medication, or G-tube feeding are necessary .
Fig. 75
1.
The pole easily secures to the Trekker by clamping the pole mount
to 1 1/8” tubing on side frame.
Fig. 76 & 77
2.
Place bolt into hole of clamp and screw on using 5/32” Allen wrench.
Fig. 78 & 79
NOTE: The I.V. Pole can be removed or folded when
not in use. Fig. 75
NOTE: The I.V. pole can easily be extended in height
to accommodate individual needs.
Fig. 75
Fig. 72
Fig. 73
Fig. 74
Fig. 76
Fig. 77
Fig. 78
Fig. 79
!
WARNING:
I.V. pole should be folded when not in use.
Fig. 80
Summary of Contents for Trekker
Page 47: ...NOTES 43 ...
