Convaid Trekker, User Manual

Page: 35 / 48

ACCESSORI ES
31
1. To install the anti-tip tube, align the tube with the end of the round frame tubing
located next to the rear wheel.
Fig. 120
2. Push the detent pin while positioning the anti-tip tube onto the round frame tubing, and then
push until the “release button” pops through the hole located on the anti-tip tube.
Fig. 121
3. Repeat steps 1 & 2 for opposite side.
Fig. 122
4. To remove the anti-tip tubes, perform 1-3 steps in reverse order.
Anti-Tip Tubes
Fig. 120 Fig. 121
Fig. 122
1. Engage caster lock by pushing the caster lock down.
Fig. 119
2. To disengage the caster lock, push the bottom
portion of caster lock.
Fig. 119
Push down to
engage Caster
Lock
Push here to
disengage
Caster Lock
Fig. 119
1. Thread the 3-Bar Slide onto the strap with the curved side down. Feed the strap through the
molded strap slot. If you have the padded version, thread the Pad onto the strap as shown
Fig. 116
2. Thread the strap end through the Buckle.
Fig. 117
3. Thread the strap end through the 3-Bar Slide.
Fig. 118
Shoe Holders
Fig. 116 Fig. 117
Fig. 118
Caster Locks