CONVAID USER’S GUIDE
Installing Seating Module onto Mobility Base
Fig. 16
Fig. 17
1. Adjust seat back angle to upright position by pulling on
the recline cord and adjusting the seat upright.
Fig. 16
2. Before installing seating module in forward configuration,
pull tilt-stopper down. This will ensure proper docking of
the seating system.
3. While using one hand to hold the upper back, the other hand
should be holding the seat base lock bar
Fig. 19 & 20
in the
open position. Approach the docking platform on the base
holding the seating module at an approximate 45 degree angle.
Fig. 17
4.
Face seating module in forward configuration and align
seat docking hooks on the back tube of the docking platform.
5. Push safety lock release lever and engage to seat base
lock bar
.
REMEMBER
When seating module is removed and reinstalled back onto the
base, tilt lever must be down when facing forward OR tilt lever must
be up when in reverse configuration.
Tilt Lever DOWN
Docking Hooks
Safety Lock Lever
Fig. 18
Fig. 19
Fig. 20
8
Summary of Contents for Trekker
Page 47: ...NOTES 43 ...
