7 Resume Function/ EPC System Monitor
74
PT-E731, PT-E731S, PT-E731H, PT-E731HS User’s Manual
(2) [Other] setting
Set items other than power. The following shows other setting screen.
(3)
(4)
(6)
(7)
(8)
(5)
Figure 7.2 [Other]setting screen
The following shows details about Item/button on Set UP screen.
Table 7.2 Set UP Screen Item/Button
No. Item/Button
Description
Note
(1) Operation Mode
Set operation mode (Standby or Continue) of resume function (refer
to p.68)
This item is available when setting USE for Resume Function. (*1)
(2) Method
Set method of resume function.
a. [Timer Set] or [Battery Voltage] can be chosen.
b. In case of choosing [Timer Set], please do time setting.
c. Even in method of [Timer Set], if low battery voltage is detected
before passing the setting time, system will go to shutdown.
d. This item is available when setting USE for Resume Function.
(3) WDT (*2) Setting
Set time to output error. If reset operation is not done after passing
the setting time, WDT error signal is output.
(4)
Main Screen is
displayed when
alarm occurring
If choose this item, EPC System Monitor’s start screen (refer to
p.69) will be opened automatically when error occurring.
