5 Startup and Termination
42
PT-E731, PT-E731S, PT-E731H, PT-E731HS User’s Manual
Method of Confirming the State of Write-protect
This section describes how to confirm present state of CF card and how to confirm whether write-protect
already been executed or not.
(1) Click [Start] on taskbar.
Move the cursor to [All programs (P)]
→
[Accessories] and click [Command Prompt].
Click here
Click here
Figure 5.7 Command Prompt
(2) Command prompt is started.
Input command “ewfmgr C: “. Show as follows after pressing [Enter] key.
Confirm the item of “State”.
- State DISABLED : The state that write-protect is released.
ENABLED : The state that write-protect is executed.
*: When confirming the state of the CF card, the item of “Boot Command” shows as “NO_CMD”,
executing/releasing write-protect cannot be switched.
Confirm this item.
Figure 5.8 The item of State and the item of Boot Command
(3) Quit command prompt. (Not require to restart PT-E).
