8 BIOS Setup
PT-E731, PT-E731S, PT-E731H, PT-E731HS User’s Manual
87
Onboard PATA Master/Onboard PATA Slave
Phoenix - AwardBIOS COMS Setup Utility
Onboard PATA Master
Item Help
IDE HDD Auto-Detection [Press Enter]
Onboard PATA Master [Auto]
Access Mode [Auto]
Capacity 1024 MB
Cylinder 1985
Head 16
Precomp 0
Landing Zone 1984
Sector 63
Menu Level
44
To auto-detect the
HDD's size, head... on
this channel
↑↓→←:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Figure 8.3 Onboard PATA Master/Onboard PATA Slave Setup
The IDE adapters control the CF card. Use a separate sub menu to configure each CF card.
Use the legend keys to navigate through this menu and exit to the main menu. Use Table 8.3 to configure
the hard disk.
Table 8.3 IDE adapters
Item
Option
Description
IDE HDD Auto-detection
Press Enter
Press Enter to auto-detect the CF card on this channel. If
detection is successful, it fills the remaining fields on this
menu.
Onboard PATA Master/
Onboard PATA Slave
None
Auto
Manual
Set the CF Card specifications. Normally specify [Auto].
When using an old CF Card that is not recognized by
[Auto] setting,
Access Mode
CHS
LBA
Large
Auto
Choose the access mode for this CF Card.
Capacity
Auto Display your CF
card size
Disk drive capacity (Approximated). Note that this size is
usually slightly greater than the size of a formatted disk
given by a disk checking program.
The following options are selectable only if the ‘IDE Channel 0/2 Master/Slave’ item is set to ‘Manual’ and ‘CHS’ item
is set to ‘Manual’
Cylinder
Min = 0
Max = 65535
Set the number of cylinders for this CF card.
Head
Min = 0
Max = 255
Set the number of heads for this CF card.
