6 Setting the Touch panel Driver
PT-E731, PT-E731S, PT-E731H, PT-E731HS User’s Manual
45
6.
Setting the Touch panel Driver
PT-E is incorporated with the touch panel driver that allows you to operate it by touching screen.
Default settings are made by factory before shipment.
Use “Touch Panel Driver Property” application to make calibration settings if necessary.
Calibration Settings
Calibration settings are used to adjust the recognized position when screen is touched.
There are two kinds of methods to do calibration setting. One is a setting that doesn’t use EEPROM
calibration; another is a setting that uses EEPROM calibration in the calibration setting.
Calibration Settings When Not Using EEPROM Calibration
The setting that doesn’t use EEPROM calibration saves the calibration data in the Windows.
When using the identical start-up disk, once made the setting at the beginning, not need to do calibration
setting later. However, when exchange a start-up disk and if a touch position is shifted, do calibration
setting again.
(1) Click [Start] on taskbar.
Move the cursor to [All programs (P)]
→
[UPDD] and click [Operation Setting].
Click here.
Figure 6.1 [Settings] button
