6 Setting the Touch panel Driver
56
PT-E731, PT-E731S, PT-E731H, PT-E731HS User’s Manual
Calibration
Used to make settings for calibration.
(1)
(3)
(4)
(5)
(6)
(7)
(8)
(2)
Figure 6.15 Calibration tab
(1) Calibration Settings
Specifies the device that these calibration setting apply to.
About the information of the controller you are using, can be confirmed by [Device] in P.56.
(2) Calibration Modes
Shows the calibration mode in use.
A device may have a number of different calibration modes.
Add calibration modes, the information that is set in (3) to (7) can be saved more than one time.
-
Click [Add (A)] button to show the following dialog box.
Input the name of calibration mode.
-
Click [Remove (R)] button to delete the calibration mode.
Figure 6.16 Add Style dialog box
