6 Setting the Touch panel Driver
PT-E731, PT-E731S, PT-E731H, PT-E731HS User’s Manual
47
(3) Calibration window is displayed.
Figure 6.3 Calibration screen
Press in order and make settings.
The method of setting is as follows.
1) Press the tip of
with a touch pen.
2) Lift the touch pen off screen.
3) After lifting the touch pen off the screen, a “beep” sounds and
appears in the next position.
Similarly, set the position where is indicated by
.
Perform this operation for all numbers of points that have been set at “point number “ in [Calibration
Setting] window.
* If the screen is not touched for the time that has been set in the calibration settings, calibration
window will be closed and calibration is aborted. Do calibration setting again.
