4 Each Component Function
28
PT-E731, PT-E731S, PT-E731H, PT-E731HS User’s Manual
CF Card Slot
The CF card (Type I, II ) can be connected. The built-in disk drive has primary master drive and primary
slave drive.
CAUTION
Do not use the CF card after removing it from PT-E.
Doing so might cause trouble such as corrupt the files in the CF card due to improper using method.
Mountting a CF card
(1) Remove the two screws on the back of PT-E, and remove the cover.
Figure 4.10 Remove the cover
(2) Confirm the up/down sides and orientation of the CF card, and insert the CF card far enough into the
built-in disk drive. Up to two pieces of disks can be mounted.
Figure 4.11 Mounting a CF card
CAUTION
The drive near the backside of PT-E is the primary master drive; the drive near the LCD panel side is
the primary slave drive.
