25
3. Lifesign (Function “ALIVE”)
For some providers, the SIM card is deactivated if no costs have been incurred within a specific period (e.g. 3 months). To keep the card active,
you can have a status text message sent regularly with this function.
Alternatively, it may be of interest to regularly have proper operation of the product signalled. If the product is impaired in its function for any
(unexpected) reasons, this may be communicated to the customer indirectly by leaving out this information message.
This command must be transmitted to activate the command:
SET ALIVE <DAYs> #1513
<Days> = number of days between messages: 1 ......30
0 = off
The following command deactivates this function.
RESET ALIVE #1513
The current status is provided with the following command:
TEST ALIVE #1513
Submission of the message always takes place at the same time. It is defined at the time of configuration of the command and is rounded to the
next full hour. Therefore, the product should first be set with the “TIME” command.
Depending on network load or weather, the text message may be submitted with a delay.
Summary of Contents for GX103+GPS
Page 35: ...35...