6
7. General Descriptions
This product is to be used to monitor the customer’s property. In case of alarm, its primary task is in informing the customer of it as quickly as
possible by text message. Scaring off by an alarm sound is an addition option that must be configured. Vibrations can be monitored, living beings
recognised with the integrated motion detector and noises determined. In case of alarm, the GX103+GPS sends an alarm text message to up to
6 saved phone number and is able to call back a phone number afterwards(optionally with the speaker deactivated, silent mode).
The customer may at any time perform other actions by sending text message from his mobile phone, e.g. determine the current GPS position
(coordination or web link), request the status, or perform a “silent call” to hear what is currently taking place in the monitored area.
The microphone or speaker can be used to accept calls and call pre-set phone numbers.
The update function can be used to give the device new functions that Conrad Electronic provides in the scope of product improvements.
The GPS receiver is used to determine and monitor GPS zones (Area, GeoFence), i.e. places where the product may be present.
The product is secured against manipulation with an internal battery.
This product is not a common phone. The sensors and GPS function increase the functional scope and thus also complexity. In the
following, the most important items that you should observe when using the product are noted.
These instructions assume the functional scope at the time of initial delivery. The option of the firmware update may add new functions
via the USB interface. Visit the website on this product from time to time on our website www.conrad.com, where you may find new
firmware and revised operating instructions.
All text message answer examples are to be understood symbolically. Actual implementation may vary. The examples should only
show the information to be expected, their format and writing.
8. Introduction
a) Description of the Operating Elements
1
GPS LED
2
Speakers
3
GPS receiver position
4
Battery LED
5
GSM LED
6
Button for “Alarm Enable/Disable”
7
On/off button
8
Button “1” (“KEY1” and hang up)
9
Button “2” (“KEY2” and speaker)
10 Button “3” (“KEY3” and accept)
11 Microphone (phone and VOICE)
12 Motion sensor (PIR)
13 Plug-in socket for extensions (EXTERN)
14 USB socket
15 SIM card holder
16 Button for reset
Summary of Contents for GX103+GPS
Page 35: ...35...
