16
5. Administration of Phone Book (Command “TEL”)
Up to 6 phone numbers can be programmed into the device. In case of alarm, a notification text message is sent to each of these phone
numbers. Additionally, only these phone numbers are accepted for the INCALL function.
If the same number is in the list several times, it will receive the same text message as many times.
The product generally can only process phone numbers in the international format:
Example: Phone number 0177/12131415 = international: +4917712131415
Sending text message commands to the product:
SET TEL1 +49111… #1513
SET TEL2 +49222… #1513
…
SET TEL6 +49666… #1513
There is the option of programming several phone numbers in a single command.
Example for 3 phone numbers (TEL1 to TEL3):
SET TEL1 +49111… +49222… + 49333… #1513
After sending the command “SET TEL....”, a text message answer with a list of saved phone numbers is generated:
GX103_GPS 1.08
———————
Alarm
SMS1
+49111
SMS2
+49222
SMS3
+49333
SMS4
empty
SMS5
empty
SMS6
empty
Recall
empty
Phone areas (only affects function “INCALL”):
There is the option of defining phone number ranges that are permitted for the INCALL function. Use the normal “SET TEL” command with the
placeholders; see the following example.
The following numbers are to be released for “INCALL”:
+491555512345
+491555523456
+491555534567
The following phone number must be programmed:
+4915555*****
The asterisks (*) are placeholders for any number.
The corresponding number of placeholders (*) must be inserted. The calling phone number is compared to these place holders. If the
calling number is longer or shorter than placeholders available, the number will be rejected.
Please observe that all other phone number combinations are permitted! You accept this risk when using this function.
Summary of Contents for GX103+GPS
Page 35: ...35...
