14
11. Functional Descriptions
In the following examples, it is assumed that the PIN of the SIM card in the device is “1513”.
a) General Configuration Commands
1. Changing the PIN Code (Command “PIN”)
To secure the product from unauthorised access, the standard PIN “1513” may be set to any other value. Change the PIN code as follows:
SET PIN <new PIN> #<old PIN>
Example: Changing old PIN 1513 to new PIN 1234:
SET PIN 1234 #1513
For every new text message command, the new PIN code now has to be appended preceded by a (#) sign. If the wrong PIN code is entered or
the PIN code is not sent, you will not receive an answering text message.
Changing of the PIN code will change both the settings of the product and the PIN code of the SIM card! The PIN code always has 4 figures.
When the PIN code is lost (lost or forgotten), the product can be reset to factory settings (see chapter “Factory Settings”). All programming will
be lost when resetting! Then the device must be programmed again. Resetting the device to factory settings will not affect the SIM card. The SIM
card PIN is retained.
2. Changing the Device Name (Command “NAME”)
If several products are operated at the same time, it is recommended to assign a different name to each device. This makes it possible to assign
alarm messages to the correct device.
The device name has a maximum length of 15 characters. Do not use any spaces or special characters.
To change the name at your device, send the following text message command:
SET NAME <new name> #1513
Example: Renaming to “NEWNAME”:
SET NAME NEWNAME #1513
Confirmation text message:
NEWNAME 1.xx
...
...
Factory reset:
RESET NAME #1513
There is no TEST action for this function.
Summary of Contents for GX103+GPS
Page 35: ...35...