![background image](http://html1.mh-extra.com/html/conrad/gx103-gps/gx103-gps_operating-instructions-manual_2653965031.webp)
31
The following message is returned for confirmation:
GX103GPS 1.08
GPS zone: 1/1
< — Zone number
Latitude:
49.549680N to 49.537480N
Longitude:
011.924780E – 01.957910E
Observe that every command “SET GPSZONE” will add a new zone. If the storage limit is reached, an error message will be returned.
Deleting all saved zones:
The following command deletes all saved zones:
RESET GPSZONE ALL #1513
Deleting one zone.
The following command deletes a single zone:
RESET GPSZONE <Zone no.> #1513
Checking a programmed zone:
To check the programmed zones in the specified location, use the following command:
TEST GPSZONE <Location no.> #1513
<Site no.> is the number of the site; permissible values: 1 to 10
You may combine several zones to one corridor. The zone thresholds are along the indicated longitudes and latitudes. Diagonal zones cannot be
indicated. The zones must overlap if they belong to one corridor.
Summary of Contents for GX103+GPS
Page 35: ...35...