CRAIN CUTTER CO., INC.
1155 WRIGLEY WAY, MILPITAS, CA 95035-5426
TEL: 408-946-6100 FAX: 408-946-4268
Printed by:HF
FORM F1625-0910
Made in
INSTRUCTION
MANUAL
FOR
America
This Crain tool is guaranteed to be free of defects
due to faulty materials or workmanship for a period
of 6 months.
During this period, any parts of tools found defective
subject to the guarantee will be replaced at no charge.
Returns should be sent freight PREPAID, in assembled
condition and with a copy of the Bill of Sale (proof of
purchase) to CRAIN CUTTER COMPANY, Milpitas,
CA 95035. New tools or loaners will not be given for
those pending warranty repairs.
No claims shall exceed in amount the suggested sales
price of the product. No other guarantee, oral or writ-
ten, is expressed or implied.
guarantee
REPLACEMENT PARTS AND
ORDERING INFORMATION
•T
hin
k Safety
•
W
ea
r E
ye Prote
ct
io
n
CRAIN
No. 625 POWER TACKER
Order no. Description
1625-01 Front Guide
& Screws
1625-02 Front Cover
1625-03 Aluminum Channel
& Screw
1625-04 Rear Bracket
& Screws
1625-05 Aluminum Cap
& Screws
1625-06 Torsion Spring
1625-07 Magazine
1625-08 Handle Set
& Screws
1625-10 Stop & Screws
1625-15 Retaining Ring
& Screws
Order no. Description
1625-17 Trigger & Spring
1625-19 Coil Housing
& Screws
1625-20 Release Button
1625-22 Driver Assembly
1625-23 Control Board
1625-34 Bumper
1625-38 Staple Coil
1625-41 Carrying Case
1625-42 Power Cord
1615-C
Driver Spring
1615-I
Micro Switch
1615-J
Trigger Lock
1615-S
Staple Pusher
1615-T
Pusher Spring
WIRING DIAGRAM
TO SW1
TO SW2
BLACK
COIL WIRE 1
WHITE
AC OUTLET
GREE
N
GROUND
1625-23
CONTROL BOARD
1615-I
MIRCO SWITCH
1625-38
STAPLE COIL
COIL WIRE 2
01
02
03
04
05
06
07
08
08
10
15
17
19
34
20
1615-J
22
23
42
1615-I
ACH
ACG
L1
L2
SW1
To L1
To L2
1615-S
1615-T
SW2
BLK To ACH
WHT To ACG
GREEN To GRD
To SW1
TO SW2
38
1615-C
IMPORTANT SAFETY
INSTRUCTIONS
GENERAL SAFETY RULES
WARNING! Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you
to lose control.
Electrical Safety
Grounded tools must be plugged into an outlet
properly installed and grounded in accordance
with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way.
Do not use any adaptor plugs. Check with a quali-
fied electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should
electrically malfunction or break down, grounding
provides a low resistance path to carry electricity
away from the user.
Avoid body contact with grounded surfaces such
as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
grounded.
Don’t expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord to carry
the tool or pull the plug from an outlet. Keep cord
away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged
cords increase the risk of electric shock.
When operating a power tool outside, use an out-
door extension cord marked “W-A” or “W.” These
