Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 76 of 81
WARNING!
Danger of injury due to improper disassembly!
Residual energy, sharp components, sharp points, and edges on and in the device or the required
tools can cause injury.
→
Make sure there is sufficient space before starting work
→
Handle open, sharp-edged components carefully
→
Make sure the work area is tidy and clean!
→
Disassemble components properly
→
Please contact the manufacturer if there are any questions
11.2
Dismantling
11.2.1
General information on dismantling the system
Once the system is no longer in use, it has to be disassembled and disposed of in an environmentally friendly way.
Before starting disassembly:
→
Remove operating and auxiliary materials as well as residual processing material, and dispose of them in an environmentally
appropriate manner.
WARNING!
Always beware of hazards due to electric shock, dust that is harmful to health, sharp edges
and movable parts!
→
Then clean the assemblies and components properly and disassemble them as required by applicable local workplace safety
and environmental protection regulations.
11.2.2
Tools needed
Allen wrench
SW 2.5
Allen wrench
SW 3
Spanner
SW 7
Flat head screwdriver
1.2 x 6.5x150 mm
Cutting tool (e.g. jigsaw)
