Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 41 of 81
Fig. 19: Holes for the end section of the conductor rail system
→
The end cap base has to be aligned flush with the
direction of travel.
Fig. 20: Aligning the end cap bar
→
Fasten the end cap base (5) with the countersunk
screw M4 (1), the washer (3) and lock nut (2).
Tightening torque:
1 Nm
Fig. 21: Side view of the fitted end cap bar
(1)
Countersunk screw
(4)
Installation surface
(2)
Lock nut
(5)
End cap bar
(3)
Washer
Direction of travel
Installation surface
End cap base
