Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 66 of 81
9.2
Tools and materials
The maintenance work on the conductor rail must be performed using commercially available metric tools.
Maintenance work
Tool
Measuring the height of the carbon brushes
Calliper
Measuring the contact force of the carbon brushes
Spring balance with a measuring range of 0 to 20 N
9.3
Cleaning
See document WV0800-0001, "Cleaning conductor rails".
9.4
Servicing schedule
The following tasks fall under the category “Servicing”:
SERVICING
Inspection
Maintenance
Repair
Checks
Cleaning
Repair
Measurements
Washing
Replacing
Testing
Resetting
Readjusting
The following sections describe the servicing work required for optimal and trouble-free operation. The tasks specified and
performed as per the maintenance plan must be documented in a record.
If regular inspections reveal increased wear, the corresponding servicing intervals should be shortened in accordance with the
actual signs of wear.
Contact the manufacturer in case of any questions regarding servicing tasks and intervals - see the customer service address on
the last page.
The operator must organize the following maintenance measures on their own in order to preserve the warranty and for general
prevention of damage.
→
Inspection, maintenance, and repair work must only be carried out by trained, qualified technicians!
→
Inspection, maintenance, and repair measures must always be documented!
