Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 52 of 81
7.
Removing the arrester.
→
Check whether all of the components have been
properly fitted.
→
Remove the arrester at the start of the system.
Fig. 44: Removing the stop
8.
Aligning the current collectors.
→
Aligning the current collectors, see Fig. 45
CAUTION!
The current collectors must be able to move freely
in order to maintain the best possible level of
contact with the conductor bar.
The connecting cables must not pull on, press
against or cause the current collectors to twist
(see section 4.2).
Fig. 45: Aligning the current collectors (viewed from the front)
1 = strain relief
Fig. 46: Dimensions in the direction of the X-axis, with strain relief (side view)
Axis
Tolerance
X
±10 mm
Y
±10 mm
