Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 47 of 81
→
Fasten the arrester in front of the end cap base
with a screw clamp.
Fig. 32: Fastening the arrester
→
Insert one connector for each conductor bar and
lightly push in by hand.
Fig. 33: Insert connectors by hand
→
Drive the connectors into the connector rails up
to the stop (1) with a plastic hammer.
Fig. 34: Drive the connectors in up to the stop (1)
