Rev. 3
i–1
I
Index
Activation Procedure, C–3
Applicable Documents, A–5, A–13, A–21
Applicable Jumper Data, A-68
ASI ConnectorPinout, A-72
ASI and EIA-422 Remote Interface Commands, A–5,
A–13, A–21, A–27, A–41, A–57
ASI/LVDS Data Interface Commands, B-25
ASI and LVDS Interface Control, A-74
ASI and LVDS Interface Defaults, A-74
ASI Module Assembly, A–22
ASI/RS-422 Interface Commands, B-22
Auxiliary Connector Pinout, A–11, A–19
Auxiliary Connector Pinout (J5), A–11
Auxiliary Function Port, A–1, A–21
Auxiliary Interface Connector - J5, A–54
Auxiliary, J5, A–11
BER Performance, 1-11
Buffer Clock Sources, A–50
Clock Drift, Wander and Jitter, A–44, A–50, B–10, B–11,
B–22, B–23
Command/Response, A–18, B–3
Common Equipment Faults Menu, B–2, B–3
Configuration, A–6, A–8, A–15, A–16, A–17, B–5, B–8,
B–11, B–15, B–18, C–4
Configuration Commands/Responses, C-5
Connector Pinout, J3, A–8, A–9, A–17
Connector Pinout, J3, Parallel/Serial DVB, B–9
Connector Pinouts, J3, A–11, A–18, A–24
Connector Pinouts, J3/J4, A–16, A–17
Connector Pinouts, J4, A–10
Connector Pinouts, J4, EIA-530, A–10, A–17
Connector Pinout, J5, A–11, A–18
Connector Pinout, J7, A–24
Connector Pinout Definitions, 2-7
Configuration Status, B-9
Data Interface Installation, A–1, A–2, A–8, A–9, A–21, A–
28, A–44
Data Interfaces, 1-5, 2-2, B-9
Demodulator Configuration Commands, B-5
Demodulator Faults Menu, B–5
Description, A–1, A–5, A–13, A–21, B–16, B–17
Device Address, A–1, A–5, A–13, A–21, A–27, A–37,
A–42, A–57, B–2, B–16, B–17, B–20, B–21, B–23
DVB Interface Connector Pinout, J3, A–9, A–17
DVB Interface Connector Pinout, J3 Receive Out, A–17
ECL/HSSI Interface, B–21
ECL/HSSI Interface Front Panel Menus, A–39
ECL/HSSI Interface Remote Control Commands, A–39
ECL/HSSI RX Interface Commands, B-22
ECL/HSSI TX Interface Commands, A–39
EIA-422 Interface Commands, A–24
EIA-422 Interface Remote Control Commands, A–12
EIA-422 Parallel/Serial Interface, A–12
EIA-530 Serial Interface Connector Pinout (J4), A–10
End Character, A–1, A–5, B–4
Environmental Requirements, A–55, A–60
Error Performance Status, B-13
External Connections, 2-6
FAST Options, 1-6, C–1
FAST System Theory, C–2
Fault Connector (J2), C–2
Four L-Band Input (J23, J24, J25, J26), 2-10
Front Panel, A–6, A–12, A–14, A–19, A–23, A–26, A–60
G.703 Interface Commands, B-23
G.703 Remote Interface Commands, A–55
Ground (GND) or Earth, A–51
Implementation, C–2
Initial Defaults, C–2
Interface Loop - Through, A–4, A–17, A–19, A–31, A–39
Summary of Contents for SDM-2020
