Comtech EF Data SDM-2020, Installation And Operation Manual

Page: 186 / 215

SDM-2020 Satellite Demodulator Remote Control Operation
Rev. 3 B–11
Interface
Config.
Status Command:
Response: <add/ICS_'cr'
>add/ICS_'cr'
RCP_xxx'cr'
RDP_xxxx'cr'
RDF_xxxx'cr'
RDVB_xxxx'cr'
ICLK_xxx'cr'
(Note 3)
INID_xxxxxxxxx'cr'
ISEL_xxxxxx'cr'
(Notes 2, 4, 6)
DM_xxx'cr' (Note 1)
RR_xxx'cr' (Note 1)
MC_xxx’cr’ (Note 2)
ERF_nnnnn.nnn’cr’ (Note 4)
TRF_nnnnn.n’cr’ (Note 4)
ILB_xxx’cr’ (Note 4)
ICFR_xxxx’cr’ (Note 4)
BC_xxx’cr’ (Note 4)
IBS_nn’cr’ (Note 4)
IRFS_1544_SSSS’cr’ (Note 4)
IRFS_2048_SSSS’cr’ (Note 4)
IRFS_6312_SSSS’cr’’ (Note 4)
IRFS_8448_SSSS’cr’ (Note 4)
IRFS_32064_SSSS’cr’ (Note 4)
IRFS_34368_SSSS’cr’ (Note 4)
IRFS_44736_SSSS’cr’ (Note 4)
IRFS_51840_SSSS’cr’’lf] (Note 4)
Receive Clock Phase
Receive Data Phase
Receive Data Fault
DVB Framing Type
Interface Mode
Interface ID
Interface Select
DM State Control
RR State Control
MC State Control
External Reference Frequency
TX Terrestrial Clock Frequency
Interface Loopback
Interface Coding Format Receive
Buffer Clock Source
Interface Buffer Size
Interface Receive Frame Structure 1544
Interface Receive Frame Structure 2048
Interface Receive Frame Structure 6312
Interface Receive Frame Structure 8448
Interface Receive Frame Structure 32064
Interface Receive Frame Structure 34368
Interface Receive Frame Structure 44736
Interface Receive Frame Structure 51840
Notes:
1. Only displayed when RS422 interface is
installed.
2. Only displayed when ASI/RS422 interface is
installed.
3. Not displayed when ASI/RS422, G.703, or
ASI/LVDS interface is installed.
4. Only displayed when G.703 interface is installed.
5. Not Used.
6. Only displayed when ASI/LVDS interface is
installed.
The interface configuration status command causes a
block of data to be returned by the addressed
demodulator. This block reflects the current
configuration of the interface. Additional configuration
status of new options and features will always be
appended to the end.
MODEM
Faults Status
(Summary) Command:
Response: <add/MFS_'cr'
>add/MFS_'cr'
DMD_xxx'cr'
IRX_xxx'cr'
CEQ_xxx'cr''lf']
Demodulator (FLT/OK)
Interface Receive Side (FLT/OK)
Common Equipment (FLT/OK)
Demodulator
Status Command:
Response: <add/DS_'cr'
>add/DS_'cr'
MOD_xxx'cr'
CD_xxx'cr'
SYN_xxx'cr'
ICH_xxx'cr'
QCH_xxx'cr'
BERT_xxx'cr'
EBNT_xxx’cr’
CONF_xxx'cr'
SFLT_xx'cr''lf']
Demodulator Module (OK/FLT)
Carrier Detect (OK/FLT)
IF Synthesizer Lock (OK/FLT)
I Channel (OK/FLT)
Q Channel (OK/FLT)
BER Threshold (OK/FLT)
EB/NO Threshold (OK/FLT)
Configuration (OK/FLT)
Number of stored faults logged (0 to 10)