Comtech EF Data SDM-2020, Installation And Operation Manual

Page: 51 / 215

SDM-2020 Satellite Demodulator Operation
Rev. 3 3–7
3.3.1 Configuration Menus
Demodulator configuration can be viewed or changed by entering the Configuration level
from the Function Select menu on the front panel.
After entering the Configuration menu, press [
←
] or [
→
] to select:
•
Demodulator
•
Interface
•
Save
•
Recall
Enter the selected configuration menu by pressing [ENTER].
Press [
←
] or [
→
] to view the selected configuration parameters.
To change a configuration parameter, press [ENTER] to begin the change process. Press
[
↑
] or [
↓
] to make the changes.
After the changes are made and the display represents the correct parameters, execute the
changes by pressing [ENTER]. After [ENTER] is pressed, the necessary programming is
initiated by the demodulator. To undo a parameter change prior to executing it, simply
press [CLEAR].