Comtech EF Data CRS-311, Installation And Operation Manual

Page: 125 / 194

CRS-311 1:1 Redundancy Switch Revision 7
Front Panel Operation MN/CRS311.IOM
5–17
5.2.5 STORE/LD (Store or Load Configuration)
STORE/LOAD CONFIG:
STORE LOAD (PRESS ENTER)
Use these submenus to store or load up to 10 different Switch configurations in the CRS ‐ 311’s
non ‐ volatile memory. These are configurations for the Switch itself; they do not affect the
connected Traffic or Redundant modems.
Use the
◄►
arrow keys to select STORE or LOAD , and then press ENTER .
This feature is operational in LOCAL MODE ONLY. If you attempt to save or load a
configuration while in Remote Mode, the following message displays:
THE SWITCH IS CURRENTLY
IN REMOTE MODE!! (CLEAR)
5.2.5.1 (STORE/LD) STORE
STORE CONFIGURATION TO
LOCATION: 10 (ENTER)
Once all desired configuration changes have been made, use the
▲▼
arrow keys to select the
location to store the current configuration, and then press ENTER .
Locations 1 through 10 are available. If the selected location does not contain a previously
stored configuration, the action is confirmed as follows:
YOUR CONFIGURATION HAS
BEEN STORED! (ENTER)
Press ENTER or CLEAR to return to the previous menu. If, however, the selected location
contains a previously stored configuration, you are alerted to this state as follows:
WARNING! LOC 10 CONTAINS
DATA! OVERWRITE? NO YES
Use the
◄►
arrow keys to select NO or YES , and then press ENTER . Selecting YES overwrites the
selected location’s existing configuration.