Server Installation
2-23
Compaq Confidential – Need to Know Required
Writer:
Rick Chew
Project:
Compaq ProLiant 8500 Servers Setup and Installation Guide
Comments:
Part Number:
323333-001
File Name:
c-ch2 Server Installation.doc
Last Saved On:
5/5/99 10:01 AM
Attaching the Cable Management
Arm Bracket and Cable Management Arm
The cable management bracket and arm assembly lets you organize and secure
the cables in the back of the server. The cable management arm attaches to the
cable management arm bracket on the server and to the rack. All cables to and
from the server are tied to this arm and swing out of the way when you access
the server.
Installing the Cable Management Arm Bracket
The cable management arm bracket holds the cable management arm on the
server.
To install the cable management arm bracket:
1.
Slide the server out or access it from the rear of the rack.
2.
Attach the cable management arm bracket to the left side of the back of
the server using the integrated thumbscrew.
1
2
Figure 2-17. Attaching a cable management arm bracket
