E-12
POST Error Codes
Writer: Your Name Saved by: Lydia Sanchez Saved date: 08/26/99 8:59 AM
Pages: 13 Words: 2459 Template: c:\word7\templates\commapp.dot
File Name e-appe.doc Part Number 158415-001
Power-On Self-Test Messages
Continued
Message
Beeps*
Probable Cause
Recommended Action
Green Power LED
Blinks 1x / Second.
None
Computer in normal Suspend
mode.
None
Green Power LED
On
None
Computer on.
None
Invalid Electronic
Serial Number
None
Electronic serial number has
become corrupted.
Run Workstation Setup. If Setup
already has data in the field or will not
allow the serial number to be entered,
download from www.compaq.com and
run SP5572.EXE (SNZERO.EXE).
Flashing Power and
Hard Drive Green
LEDs
None
Unseated riser board.
1. Remove riser board.
2. Wipe
connector.
3. Reinstall (refer to Chapter 5,
“Upgrading the Desktop
Workstation,” or Chapter 6,
“Upgrading the Minitower
Workstation,” for directions on
removing the riser board).
Red Power LED
Blinks Every 2 or
more Seconds.
None
Power supply overloaded.
1. Push in power button. LED should
be green.
2. Remove all AC power from
workstation, wait 30 seconds, then
apply power.
3. Remove load from power supply
by removing options one at a time
until workstation runs.
4. Check for damage to system
board.
5. Replace system board.
6. Replace power supply.
* L = Long, S = Short
Continued
Summary of Contents for Deskpro AP240
Page 1: ...Reference Guide Compaq Deskpro Workstation AP240...
Page 216: ......
